Jerry Can Holder – Single – Front Runner

The Front Runner Single Jerry Can Holder is designed to be mounted perpendicular ACROSS 2 slats. If you’d like to mount a single jerry can holder PARALLEL to the slats, you will need to use these brackets.

Since many of today’s new jerry cans vary ever so slightly is size (due to manufacturing discrepancies), most fuel can mounting systems fail to secure the cans properly.

There is often wiggle room between the carrier and the can. And that gap, however slight, causes rattle and wear. What’s the point in strapping down your cans if they aren’t truly secure.

The Front Runner jerry can holders offer a smart no rattle no wear solution. The adjustable locking steel clasp means your cans can be secured firmly in place over a lifetime of off-road abuse.

For use with 20l / 5.3 gallon NATO/Wedco style military cans. Will not work with Scepter style cans.

Consists of:
1x Jerry can holder base (non-welded)
1x Jerry can strap
1x Cross strap
1x Latch
Bolt kit

Materials used:
Black powder-coated 3CR12 stainless steel

Product Dimensions:
Overall Dimensions:
480mm (18.9″) L x 160mm (6.3″) W x 345mm (13.6″) H

Base Dimensions:
480mm (18.9″) L x 160mm (6.3″) W x 50mm (2″) H

Latch Buckle Dimensions:
45mm (1.8″) W x 185mm (7.3″) H

Strap Dimensions:
45mm (1.8″) W x 3mm (0.1″) Thick

Cross Strap Dimensions:
180mm (7.1″) L x 45mm (1.8″) W

Weight:
2.82kg (6.2lbs)

Note:
For use with 20l / 5.3 gallon NATO/Wedco style military cans. Will not work with Scepter style cans.